◆ bt_mesh_light_ctrl_prop

#include <include/bluetooth/mesh/light_ctrl.h>

Light Lightness Control properties

Enumerator
BT_MESH_LIGHT_CTRL_PROP_ILLUMINANCE_ON	Target ambient illuminance in the On state. Unit: Lux Encoding: 24 bit unsigned scalar (Resolution: 0.01 lx) Range: 0 to 167772.13
BT_MESH_LIGHT_CTRL_PROP_ILLUMINANCE_PROLONG	Target ambient illuminance in the Prolong state. Unit: Lux Encoding: 24 bit unsigned scalar (Resolution: 0.01 lx) Range: 0 to 167772.13
BT_MESH_LIGHT_CTRL_PROP_ILLUMINANCE_STANDBY	Target ambient illuminance in the Standby state. Unit: Lux Encoding: 24 bit unsigned scalar (Resolution: 0.01 lx) Range: 0 to 167772.13
BT_MESH_LIGHT_CTRL_PROP_LIGHTNESS_ON	Lightness in the On state. Unit: Unitless Encoding: 16 bit unsigned scalar (Resolution: 1) Range: 0 to 65535
BT_MESH_LIGHT_CTRL_PROP_LIGHTNESS_PROLONG	Lightness in the Prolong state. Unit: Unitless Encoding: 16 bit unsigned scalar (Resolution: 1) Range: 0 to 65535
BT_MESH_LIGHT_CTRL_PROP_LIGHTNESS_STANDBY	Lightness in the Standby state. Unit: Unitless Encoding: 16 bit unsigned scalar (Resolution: 1) Range: 0 to 65535
BT_MESH_LIGHT_CTRL_PROP_REG_ACCURACY	Regulator Accuracy. Unit: Percent Encoding: 8 bit unsigned scalar (Resolution: 0.5 %) Range: 0 to 100.0
BT_MESH_LIGHT_CTRL_PROP_TIME_FADE_PROLONG	Fade time for fading to the Prolong state. Unit: Seconds Encoding: 24 bit unsigned scalar (Resolution: 1 ms) Range: 0 to 16777.214
BT_MESH_LIGHT_CTRL_PROP_TIME_FADE_ON	Fade time for fading to the On state. Unit: Seconds Encoding: 24 bit unsigned scalar (Resolution: 1 ms) Range: 0 to 16777.214
BT_MESH_LIGHT_CTRL_PROP_TIME_FADE_STANDBY_AUTO	Fade time for fading to the Standby state (auto mode). Unit: Seconds Encoding: 24 bit unsigned scalar (Resolution: 1 ms) Range: 0 to 16777.214
BT_MESH_LIGHT_CTRL_PROP_TIME_FADE_STANDBY_MANUAL	Fade time for fading to the Standby state (manual mode). Unit: Seconds Encoding: 24 bit unsigned scalar (Resolution: 1 ms) Range: 0 to 16777.214
BT_MESH_LIGHT_CTRL_PROP_TIME_OCCUPANCY_DELAY	Delay from Occupancy sensor reports until the light turns on. Unit: Seconds Encoding: 24 bit unsigned scalar (Resolution: 1 ms) Range: 0 to 16777.214
BT_MESH_LIGHT_CTRL_PROP_TIME_PROLONG	Time to stay in the Prolong state. - Unit: Seconds Encoding: 24 bit unsigned scalar (Resolution: 1 ms) Range: 0 to 16777.214
BT_MESH_LIGHT_CTRL_PROP_TIME_ON	Time to stay in the On state. Unit: Seconds Encoding: 24 bit unsigned scalar (Resolution: 1 ms) Range: 0 to 16777.214