sdc_hci_cmd_le_write_suggested_default_data_length()

uint8_t sdc_hci_cmd_le_write_suggested_default_data_length

(

const sdc_hci_cmd_le_write_suggested_default_data_length_t *

p_params

)

#include <softdevice_controller/include/sdc_hci_cmd_le.h>

LE Write Suggested Default Data Length.

The description below is extracted from Core_v6.0, Vol 4, Part E, Section 7.8.35

The HCI_LE_Write_Suggested_Default_Data_Length command allows the Host to specify its suggested values for the Controller's maximum transmission number of payload octets and maximum packet transmission time for packets containing LL Data PDUs to be used for new connections. The Controller may use smaller or larger values for connInitialMaxTxOctets and connInitialMaxTxTime based on local information. (See [Vol 6] Part B, Section 4.5.10).

Event(s) generated (unless masked away): When the HCI_LE_Write_Suggested_Default_Data_Length command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[in]

p_params

Input parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.