sdc_hci_cmd_le_read_suggested_default_data_length()

uint8_t sdc_hci_cmd_le_read_suggested_default_data_length

(

sdc_hci_cmd_le_read_suggested_default_data_length_return_t *

p_return

)

#include <softdevice_controller/include/sdc_hci_cmd_le.h>

LE Read Suggested Default Data Length.

The description below is extracted from Core_v6.0, Vol 4, Part E, Section 7.8.34

The HCI_LE_Read_Suggested_Default_Data_Length command allows the Host to read the Host's suggested values (Suggested_Max_TX_Octets and Suggested_Max_TX_Time) for the Controller's maximum transmitted number of payload octets and maximum packet transmission time for packets containing LL Data PDUs to be used for new connections (see [Vol 6] Part B, Section 4.5.10).

Event(s) generated (unless masked away): When the HCI_LE_Read_Suggested_Default_Data_Length command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[out]

p_return

Extra return parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.