sdc_hci_cmd_le_read_rf_path_compensation()

uint8_t sdc_hci_cmd_le_read_rf_path_compensation

(

sdc_hci_cmd_le_read_rf_path_compensation_return_t *

p_return

)

#include <softdevice_controller/include/sdc_hci_cmd_le.h>

LE Read RF Path Compensation.

The description below is extracted from Core_v6.0, Vol 4, Part E, Section 7.8.75

The HCI_LE_Read_RF_Path_Compensation command is used to read the RF path compensation value parameters used in the Tx power level and RSSI calculation.

Event(s) generated (unless masked away): When the HCI_LE_Read_RF_Path_Compensation command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[out]

p_return

Extra return parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.