sdc_hci_cmd_le_remove_device_from_periodic_adv_list()

uint8_t sdc_hci_cmd_le_remove_device_from_periodic_adv_list

(

const sdc_hci_cmd_le_remove_device_from_periodic_adv_list_t *

p_params

)

#include <softdevice_controller/include/sdc_hci_cmd_le.h>

LE Remove Device From Periodic Advertiser List.

The description below is extracted from Core_v6.0, Vol 4, Part E, Section 7.8.71

The HCI_LE_Remove_Device_From_Periodic_Advertiser_List command is used to remove one entry from the list of Periodic Advertisers stored in the Controller. Removals from the Periodic Advertisers List take effect immediately.

If the Host issues this command when an HCI_LE_Periodic_Advertising_Create_Sync command is pending, the Controller shall return the error code Command Disallowed (0x0C).

When a Controller cannot remove an entry from the Periodic Advertiser list because it is not found, the Controller shall return the error code Unknown Advertising Identifier (0x42).

Event(s) generated (unless masked away): When the HCI_LE_Remove_Device_From_Periodic_Advertiser_List command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[in]

p_params

Input parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.