sdc_hci_cmd_le_read_antenna_information()

uint8_t sdc_hci_cmd_le_read_antenna_information

(

sdc_hci_cmd_le_read_antenna_information_return_t *

p_return

)

#include <softdevice_controller/include/sdc_hci_cmd_le.h>

LE Read Antenna Information.

The description below is extracted from Core_v6.0, Vol 4, Part E, Section 7.8.87

The HCI_LE_Read_Antenna_Information command allows the Host to read the switching rates, the sampling rates, the number of antennae, and the maximum length of a transmitted Constant Tone Extension supported by the Controller.

If the Controller does not support antenna switching, the value of Max_Switching_Pattern_Length shall still be valid but will not be used by the Host.

Event(s) generated (unless masked away): When the HCI_LE_Read_Antenna_Information command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[out]

p_return

Extra return parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.