sdc_hci_cmd_le_set_resolvable_private_address_timeout()

uint8_t sdc_hci_cmd_le_set_resolvable_private_address_timeout

(

const sdc_hci_cmd_le_set_resolvable_private_address_timeout_t *

p_params

)

#include <softdevice_controller/include/sdc_hci_cmd_le.h>

LE Set Resolvable Private Address Timeout.

The description below is extracted from Core_v6.0, Vol 4, Part E, Section 7.8.45

The HCI_LE_Set_Resolvable_Private_Address_Timeout command set the length of time the Controller uses a Resolvable Private Address before a new resolvable private address is generated and starts being used.

This timeout applies to all resolvable private addresses generated by the Controller.

Event(s) generated (unless masked away): When the HCI_LE_Set_Resolvable_Private_Address_Timeout command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[in]

p_params

Input parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.