sdc_hci_cmd_cb_write_conn_accept_timeout()

uint8_t sdc_hci_cmd_cb_write_conn_accept_timeout

(

const sdc_hci_cmd_cb_write_conn_accept_timeout_t *

p_params

)

#include <softdevice_controller/include/sdc_hci_cmd_controller_baseband.h>

Write Connection Accept Timeout.

The description below is extracted from Core_v6.0, Vol 4, Part E, Section 7.3.14

This command writes the value for the Connection_Accept_Timeout configuration parameter. See Section 6.7.

Event(s) generated (unless masked away): When the HCI_Write_Connection_Accept_Timeout command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[in]

p_params

Input parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.