hawkBit Firmware Over-the-Air for Zephyr Project. More...

Data Structures
struct	hawkbit_runtime_config
	hawkBit configuration structure. More...

Macros
#define	HAWKBIT_JSON_URL "/default/controller/v1"

Typedefs
typedef int(*	hawkbit_config_device_data_cb_handler_t) (const char device_id, uint8_t buffer, const size_t buffer_size)
	Callback to provide the custom data to the hawkBit server.

typedef bool(*	hawkbit_get_device_identity_cb_handler_t) (char *id, int id_max_len)
	Callback to get the device identity.

Enumerations
enum	hawkbit_response { HAWKBIT_NETWORKING_ERROR , HAWKBIT_UNCONFIRMED_IMAGE , HAWKBIT_PERMISSION_ERROR , HAWKBIT_METADATA_ERROR , HAWKBIT_DOWNLOAD_ERROR , HAWKBIT_OK , HAWKBIT_UPDATE_INSTALLED , HAWKBIT_NO_UPDATE , HAWKBIT_CANCEL_UPDATE , HAWKBIT_NOT_INITIALIZED , HAWKBIT_PROBE_IN_PROGRESS }
	Response message from hawkBit. More...

Functions
int	hawkbit_set_custom_data_cb (hawkbit_config_device_data_cb_handler_t cb)
	Set the custom data callback.

int	hawkbit_init (void)
	Init the flash partition.

void	hawkbit_autohandler (void)
	Runs hawkBit probe and hawkBit update automatically.

enum hawkbit_response	hawkbit_probe (void)
	The hawkBit probe verify if there is some update to be performed.

void	hawkbit_reboot (void)
	Request system to reboot.

int	hawkbit_set_device_identity_cb (hawkbit_get_device_identity_cb_handler_t cb)
	Set the device identity callback.

int	hawkbit_set_config (struct hawkbit_runtime_config *config)
	Set the hawkBit server configuration settings.

struct hawkbit_runtime_config	hawkbit_get_config (void)
	Get the hawkBit server configuration settings.

static int	hawkbit_set_server_addr (char *addr_str)
	Set the hawkBit server address.

static int	hawkbit_set_server_port (uint16_t port)
	Set the hawkBit server port.

static int	hawkbit_set_ddi_security_token (char *token)
	Set the hawkBit security token.

static int	hawkbit_set_tls_tag (sec_tag_t tag)
	Set the hawkBit TLS tag.

static char *	hawkbit_get_server_addr (void)
	Get the hawkBit server address.

static uint16_t	hawkbit_get_server_port (void)
	Get the hawkBit server port.

static char *	hawkbit_get_ddi_security_token (void)
	Get the hawkBit security token.

static sec_tag_t	hawkbit_get_tls_tag (void)
	Get the hawkBit TLS tag.

int32_t	hawkbit_get_action_id (void)
	Get the hawkBit action id.

int	hawkbit_reset_action_id (void)
	Resets the hawkBit action id, that is saved in settings.

Detailed Description

hawkBit Firmware Over-the-Air for Zephyr Project.

Macro Definition Documentation

◆ HAWKBIT_JSON_URL

#define HAWKBIT_JSON_URL "/default/controller/v1"

#include <zephyr/mgmt/hawkbit.h>

Typedef Documentation

◆ hawkbit_config_device_data_cb_handler_t

typedef int(* hawkbit_config_device_data_cb_handler_t) (const char *device_id, uint8_t *buffer, const size_t buffer_size)

#include <zephyr/mgmt/hawkbit.h>

Callback to provide the custom data to the hawkBit server.

This callback is used to provide the custom data to the hawkBit server. The custom data is used to provide the hawkBit server with the device specific data.

Parameters

device_id	The device ID.
buffer	The buffer to store the json.
buffer_size	The size of the buffer.

◆ hawkbit_get_device_identity_cb_handler_t

typedef bool(* hawkbit_get_device_identity_cb_handler_t) (char *id, int id_max_len)

#include <zephyr/mgmt/hawkbit.h>

Callback to get the device identity.

Parameters

id	Pointer to the buffer to store the device identity
id_max_len	The maximum length of the buffer

Enumeration Type Documentation

◆ hawkbit_response

enum hawkbit_response

#include <zephyr/mgmt/hawkbit.h>

Response message from hawkBit.

These messages are used to inform the server and the user about the process status of the hawkBit and also used to standardize the errors that may occur.

Enumerator
HAWKBIT_NETWORKING_ERROR
HAWKBIT_UNCONFIRMED_IMAGE
HAWKBIT_PERMISSION_ERROR
HAWKBIT_METADATA_ERROR
HAWKBIT_DOWNLOAD_ERROR
HAWKBIT_OK
HAWKBIT_UPDATE_INSTALLED
HAWKBIT_NO_UPDATE
HAWKBIT_CANCEL_UPDATE
HAWKBIT_NOT_INITIALIZED
HAWKBIT_PROBE_IN_PROGRESS

Function Documentation

◆ hawkbit_autohandler()

void hawkbit_autohandler ( void )

#include <zephyr/mgmt/hawkbit.h>

Runs hawkBit probe and hawkBit update automatically.

The hawkbit_autohandler handles the whole process in pre-determined time intervals.

◆ hawkbit_get_action_id()

int32_t hawkbit_get_action_id ( void )

#include <zephyr/mgmt/hawkbit.h>

Get the hawkBit action id.

Returns: Action id.

◆ hawkbit_get_config()

struct hawkbit_runtime_config hawkbit_get_config ( void )

#include <zephyr/mgmt/hawkbit.h>

Get the hawkBit server configuration settings.

Returns: Configuration settings.

◆ hawkbit_get_ddi_security_token()

static char * hawkbit_get_ddi_security_token ( void )

inlinestatic

#include <zephyr/mgmt/hawkbit.h>

Get the hawkBit security token.

Returns: Security token.

◆ hawkbit_get_server_addr()

static char * hawkbit_get_server_addr ( void )

inlinestatic

#include <zephyr/mgmt/hawkbit.h>

Get the hawkBit server address.

Returns: Server address.

◆ hawkbit_get_server_port()

static uint16_t hawkbit_get_server_port ( void )

inlinestatic

#include <zephyr/mgmt/hawkbit.h>

Get the hawkBit server port.

Returns: Server port.

◆ hawkbit_get_tls_tag()

static sec_tag_t hawkbit_get_tls_tag ( void )

inlinestatic

#include <zephyr/mgmt/hawkbit.h>

Get the hawkBit TLS tag.

Returns: TLS tag.

◆ hawkbit_init()

int hawkbit_init ( void )

#include <zephyr/mgmt/hawkbit.h>

Init the flash partition.

Return values

0	on success.
-errno	if init fails.

◆ hawkbit_probe()

enum hawkbit_response hawkbit_probe ( void )

#include <zephyr/mgmt/hawkbit.h>

The hawkBit probe verify if there is some update to be performed.

Return values

HAWKBIT_NETWORKING_ERROR	fail to connect to the hawkBit server.
HAWKBIT_UNCONFIRMED_IMAGE	image is unconfirmed.
HAWKBIT_PERMISSION_ERROR	fail to get the permission to access the hawkBit server.
HAWKBIT_METADATA_ERROR	fail to parse or to encode the metadata.
HAWKBIT_DOWNLOAD_ERROR	fail while downloading the update package.
HAWKBIT_OK	if the image was already updated.
HAWKBIT_UPDATE_INSTALLED	if an update was installed. Reboot is required to apply it.
HAWKBIT_NO_UPDATE	if no update was available.
HAWKBIT_CANCEL_UPDATE	if the update was cancelled by the server.
HAWKBIT_NOT_INITIALIZED	if hawkBit is not initialized.
HAWKBIT_PROBE_IN_PROGRESS	if probe is currently running.

◆ hawkbit_reboot()

void hawkbit_reboot ( void )

#include <zephyr/mgmt/hawkbit.h>

Request system to reboot.

◆ hawkbit_reset_action_id()

int hawkbit_reset_action_id ( void )

#include <zephyr/mgmt/hawkbit.h>

Resets the hawkBit action id, that is saved in settings.

This should be done after changing the hawkBit server.

Return values

0	on success.
-EAGAIN	if probe is currently running.
-EIO	if the action id could not be reset.

◆ hawkbit_set_config()

int hawkbit_set_config ( struct hawkbit_runtime_config * config )

#include <zephyr/mgmt/hawkbit.h>

Set the hawkBit server configuration settings.

Parameters

config Configuration settings to set.

Return values

0	on success.
-EAGAIN	if probe is currently running.

◆ hawkbit_set_custom_data_cb()

int hawkbit_set_custom_data_cb ( hawkbit_config_device_data_cb_handler_t cb )

#include <zephyr/mgmt/hawkbit.h>

Set the custom data callback.

This function is used to set the custom data callback. The callback is used to provide the custom data to the hawkBit server.

Parameters

cb	The callback function.

Return values

0	on success.
-EINVAL	if the callback is NULL.

◆ hawkbit_set_ddi_security_token()

static int hawkbit_set_ddi_security_token ( char * token )

inlinestatic

#include <zephyr/mgmt/hawkbit.h>

Set the hawkBit security token.

Parameters

token Security token to set.

Return values

0	on success.
-EAGAIN	if probe is currently running.

◆ hawkbit_set_device_identity_cb()

int hawkbit_set_device_identity_cb ( hawkbit_get_device_identity_cb_handler_t cb )

#include <zephyr/mgmt/hawkbit.h>

Set the device identity callback.

This function is used to set a custom device identity callback.

Parameters

cb	The callback function.

Return values

0	on success.
-EINVAL	if the callback is NULL.

◆ hawkbit_set_server_addr()

static int hawkbit_set_server_addr ( char * addr_str )

inlinestatic

#include <zephyr/mgmt/hawkbit.h>

Set the hawkBit server address.

Parameters

addr_str Server address to set.

Return values

0	on success.
-EAGAIN	if probe is currently running.

◆ hawkbit_set_server_port()

static int hawkbit_set_server_port ( uint16_t port )

inlinestatic

#include <zephyr/mgmt/hawkbit.h>

Set the hawkBit server port.

Parameters

port	Server port to set.

Return values

0	on success.
-EAGAIN	if probe is currently running.

◆ hawkbit_set_tls_tag()

static int hawkbit_set_tls_tag ( sec_tag_t tag )

inlinestatic

#include <zephyr/mgmt/hawkbit.h>

Set the hawkBit TLS tag.

Parameters

tag	TLS tag to set.

Return values

0	on success.
-EAGAIN	if probe is currently running.

Data Structures

Macros

Typedefs

Enumerations

Functions

Detailed Description

Macro Definition Documentation

◆ HAWKBIT_JSON_URL

Typedef Documentation

◆ hawkbit_config_device_data_cb_handler_t

◆ hawkbit_get_device_identity_cb_handler_t

Enumeration Type Documentation

◆ hawkbit_response

Function Documentation

◆ hawkbit_autohandler()

◆ hawkbit_get_action_id()

◆ hawkbit_get_config()

◆ hawkbit_get_ddi_security_token()

◆ hawkbit_get_server_addr()

◆ hawkbit_get_server_port()

◆ hawkbit_get_tls_tag()

◆ hawkbit_init()

◆ hawkbit_probe()

◆ hawkbit_reboot()

◆ hawkbit_reset_action_id()

◆ hawkbit_set_config()

◆ hawkbit_set_custom_data_cb()

◆ hawkbit_set_ddi_security_token()

◆ hawkbit_set_device_identity_cb()

◆ hawkbit_set_server_addr()

◆ hawkbit_set_server_port()

◆ hawkbit_set_tls_tag()