10#ifndef ZEPHYR_INCLUDE_BLUETOOTH_MESH_MSG_H_
11#define ZEPHYR_INCLUDE_BLUETOOTH_MESH_MSG_H_
30#define BT_MESH_MIC_SHORT 4
32#define BT_MESH_MIC_LONG 8
39#define BT_MESH_MODEL_OP_LEN(_op) ((_op) <= 0xff ? 1 : (_op) <= 0xffff ? 2 : 3)
50#define BT_MESH_MODEL_BUF_LEN(_op, _payload_len) \
51 (BT_MESH_MODEL_OP_LEN(_op) + (_payload_len) + BT_MESH_MIC_SHORT)
62#define BT_MESH_MODEL_BUF_LEN_LONG_MIC(_op, _payload_len) \
63 (BT_MESH_MODEL_OP_LEN(_op) + (_payload_len) + BT_MESH_MIC_LONG)
72#define BT_MESH_MODEL_BUF_DEFINE(_buf, _op, _payload_len) \
73 NET_BUF_SIMPLE_DEFINE(_buf, BT_MESH_MODEL_BUF_LEN(_op, (_payload_len)))
119#define BT_MESH_MSG_CTX_INIT(net_key_idx, app_key_idx, dst, ttl) \
121 .net_idx = (net_key_idx), \
122 .app_idx = (app_key_idx), \
133#define BT_MESH_MSG_CTX_INIT_APP(app_key_idx, dst) \
134 BT_MESH_MSG_CTX_INIT(0, app_key_idx, dst, BT_MESH_TTL_DEFAULT)
143#define BT_MESH_MSG_CTX_INIT_DEV(net_key_idx, dst) \
144 BT_MESH_MSG_CTX_INIT(net_key_idx, BT_MESH_KEY_DEV_REMOTE, dst, BT_MESH_TTL_DEFAULT)
151#define BT_MESH_MSG_CTX_INIT_PUB(pub) \
153 .app_idx = (pub)->key, \
154 .addr = (pub)->addr, \
155 .send_ttl = (pub)->ttl, \
156 .uuid = (pub)->uuid, \
235 return (ack->
op != 0);
int bt_mesh_msg_ack_ctx_prepare(struct bt_mesh_msg_ack_ctx *ack, uint32_t op, uint16_t dst, void *user_data)
Prepare an acknowledged message context for the incoming message to wait.
static void bt_mesh_msg_ack_ctx_rx(struct bt_mesh_msg_ack_ctx *ack)
Mark a message as acknowledged.
Definition msg.h:255
void bt_mesh_msg_ack_ctx_clear(struct bt_mesh_msg_ack_ctx *ack)
Clear parameters of an acknowledged message context.
int bt_mesh_msg_ack_ctx_wait(struct bt_mesh_msg_ack_ctx *ack, k_timeout_t timeout)
Wait for a message acknowledge.
static void bt_mesh_msg_ack_ctx_reset(struct bt_mesh_msg_ack_ctx *ack)
Reset the synchronization semaphore in an acknowledged message context.
Definition msg.h:197
static bool bt_mesh_msg_ack_ctx_busy(struct bt_mesh_msg_ack_ctx *ack)
Check if the acknowledged message context is initialized with an opcode.
Definition msg.h:233
void bt_mesh_model_msg_init(struct net_buf_simple *msg, uint32_t opcode)
Initialize a model message.
static void bt_mesh_msg_ack_ctx_init(struct bt_mesh_msg_ack_ctx *ack)
Initialize an acknowledged message context.
Definition msg.h:186
bool bt_mesh_msg_ack_ctx_match(const struct bt_mesh_msg_ack_ctx *ack, uint32_t op, uint16_t addr, void **user_data)
Check if an opcode and address of a message matches the expected one.
void k_sem_reset(struct k_sem *sem)
Resets a semaphore's count to zero.
void k_sem_give(struct k_sem *sem)
Give a semaphore.
int k_sem_init(struct k_sem *sem, unsigned int initial_count, unsigned int limit)
Initialize a semaphore.
__UINT32_TYPE__ uint32_t
Definition stdint.h:90
__UINT8_TYPE__ uint8_t
Definition stdint.h:88
__UINT16_TYPE__ uint16_t
Definition stdint.h:89
__INT8_TYPE__ int8_t
Definition stdint.h:72
Abstraction that describes a Mesh Model instance.
Definition access.h:891
Acknowledged message context for tracking the status of model messages pending a response.
Definition msg.h:172
uint32_t op
Opcode we're waiting for.
Definition msg.h:174
void * user_data
User specific parameter.
Definition msg.h:176
struct k_sem sem
Sync semaphore.
Definition msg.h:173
uint16_t dst
Address of the node that should respond.
Definition msg.h:175
Message sending context.
Definition msg.h:76
uint16_t net_idx
NetKey Index of the subnet to send the message on.
Definition msg.h:78
int8_t recv_rssi
RSSI of received packet.
Definition msg.h:93
bool send_rel
Force sending reliably by using segment acknowledgment.
Definition msg.h:99
uint16_t addr
Remote address.
Definition msg.h:84
uint8_t send_ttl
TTL, or BT_MESH_TTL_DEFAULT for default TTL.
Definition msg.h:105
const uint8_t * uuid
Label UUID if Remote address is Virtual address, or NULL otherwise.
Definition msg.h:90
uint16_t app_idx
AppKey Index to encrypt the message with.
Definition msg.h:81
uint16_t recv_dst
Destination address of a received message.
Definition msg.h:87
bool rnd_delay
Send message with a random delay according to the Access layer transmitting rules.
Definition msg.h:102
uint8_t recv_ttl
Received TTL value.
Definition msg.h:96
Kernel timeout type.
Definition sys_clock.h:65
Simple network buffer representation.
Definition net_buf.h:89