HID Peripheral
Overview
Similar to the Peripheral sample, except that this application specifically exposes the HID GATT Service. The report map used is for a generic mouse.
In the default configuration the sample uses passkey authentication (displays a
code on the peripheral and requires that to be entered on the host during
pairing) and requires an authenticated link to access the GATT characteristics.
To disable authentication and just use encrypted channels instead, build the
sample with CONFIG_SAMPLE_BT_USE_AUTHENTICATION=n.
Requirements
BlueZ running on the host, or
A board with Bluetooth LE support
Building and Running
This sample can be found under samples/bluetooth/peripheral_hids in the Zephyr tree.
See bluetooth samples section for details.