LSM303DLHC Magnetometer and Accelerometer sensor

Overview

This sample application periodically reads magnetometer and accelerometer data from the LSM303DLHC eCompass module’s sensors, and displays the sensor data on the console.

Requirements

This sample uses the LSM303DLHC, ST MEMS system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor, controlled using the I2C interface.

References

For more information about the LSM303DLHC eCompass module, see https://www.st.com/en/mems-and-sensors/lsm303dlhc.html

Building and Running

This project outputs sensor data to the console. It requires a LSM303DLHC system-in-package, which is present on the stm32f3_disco board

west build -b stm32f3_disco samples/sensor/lsm303dlhc

Sample Output

Magnetometer data:
( x y z ) = ( 0.531818  -0.435454  -0.089090 )
Accelerometer data:
( x y z ) = ( -0.078127  -0.347666  1.105502 )
Magnetometer data:
( x y z ) = ( -0.003636  0.297272  -0.255454 )
Accelerometer data:
( x y z ) = ( 0.074221  -0.304696  0.972685 )

<repeats endlessly every 2 seconds>

See also

Sensor Interface