Serial LTE modem

The Serial LTE Modem (SLM) application can be used to emulate a stand-alone LTE modem on an nRF91 Series device. The application accepts both the modem-specific AT commands and proprietary AT commands. The AT commands are documented in the following guides:

• Modem-specific AT commands - nRF91x1 AT Commands Reference Guide and nRF9160 AT Commands Reference Guide

• Proprietary AT commands - SLM-specific AT commands

See the subpages for how to use the application, how to extend it, and information on the supported AT commands.

Subpages:

• Application description
  • Overview
  • Requirements
  • Configuration
  • Building and running
  • Dependencies
• nRF91 Series as a Zephyr-compatible modem
  • Overview
  • Configuration
  • Developing the Zephyr application
  • Flashing and running
• Testing scenarios
  • Generic AT commands
  • TCP/IP AT commands
  • ICMP AT commands
  • FTP AT commands
  • TWI AT commands
• Extending the application
  • Adding AT commands
• Running in data mode
  • Overview
  • Configuration options
  • Data mode AT commands
• SLM-specific AT commands
  • Generic AT commands
  • CMUX AT commands
  • FOTA AT commands
  • FTP AT commands
  • GNSS AT commands
  • GPIO AT commands
  • HTTP client AT commands
  • ICMP AT commands
  • LwM2M carrier library AT commands
  • MQTT client AT commands
  • nRF Cloud AT commands
  • PPP AT commands
  • SMS AT commands
  • Socket AT commands
  • TCP and UDP AT commands
  • TWI AT commands