fem_al.h File Reference

#include <stdint.h>
#include <stdbool.h>
#include <hal/nrf_radio.h>

Go to the source code of this file.

Typedefs
typedef uint8_t	fem_tx_power_control
	Type holding Tx power control to be applied to front-end module.

Enumerations
enum	fem_antenna { FEM_ANTENNA_1 , FEM_ANTENNA_2 }
	The front-end module (FEM) antennas. More...

Functions
int	fem_init (NRF_TIMER_Type *timer_instance, uint8_t compare_channel_mask)
	Initialize the front-end module.
int	fem_power_up (void)
	Power-up the front-end module.
int	fem_power_down (void)
	Power-down the front-end module.
int	fem_tx_power_control_set (fem_tx_power_control tx_power_control)
	Configure Tx power control of the front-end module.
uint32_t	fem_default_ramp_up_time_get (bool rx, nrf_radio_mode_t mode)
	Get the default radio ramp-up time for reception or transmission with a given data rate and modulation.
int	fem_tx_configure (uint32_t ramp_up_time)
	Configure the front-end module to TX mode (PA).
int	fem_rx_configure (uint32_t ramp_up_time)
	Configure the front-end module to RX mode (LNA).
int	fem_txrx_configuration_clear (void)
	Clear up the configuration provided by the fem_tx_configure or fem_rx_configure.
void	fem_txrx_stop (void)
	Stop the front-end module RX/TX mode immediately.
int	fem_antenna_select (enum fem_antenna ant)
	Chooses one of two physical antenna outputs.
uint32_t	fem_radio_tx_ramp_up_delay_get (bool fast, nrf_radio_mode_t mode)
	Get the radio ramp-up time in transmit mode.
uint32_t	fem_radio_rx_ramp_up_delay_get (bool fast, nrf_radio_mode_t mode)
	Get the radio ramp-up time in receive mode.
int8_t	fem_tx_output_power_prepare (int8_t power, int8_t *radio_tx_power, uint16_t freq_mhz)
	Set the front-end module Tx power control and returns output power to be set on the radio peripheral to get requested output power.
int8_t	fem_tx_output_power_check (int8_t power, uint16_t freq_mhz, bool tx_power_ceiling)
	Check a real Tx output power, for the SoC with the front-end module for given parameters.
static int8_t	fem_tx_output_power_min_get (uint16_t freq_mhz)
	Get the minimum Tx output power for the SoC with the front-end module.
static int8_t	fem_tx_output_power_max_get (uint16_t freq_mhz)
	Get the maximum Tx output power for the SoC with the front-end module.
int8_t	fem_default_tx_output_power_get (void)
	Get the front-end module default Tx output power.
void	fem_errata_25X (nrf_radio_mode_t mode)
	Apply the workaround for the Errata 254, 255, 256, 257 when appropriate.