nRF Connect SDK API 2.8.99
Loading...
Searching...
No Matches
hci_vs_sdc.h File Reference
#include <stdint.h>
#include <sdc_hci_vs.h>

Go to the source code of this file.

Functions

int hci_vs_sdc_zephyr_read_version_info (sdc_hci_cmd_vs_zephyr_read_version_info_return_t *return_params)
 Zephyr Read Version Information.
 
int hci_vs_sdc_zephyr_read_supported_commands (sdc_hci_cmd_vs_zephyr_read_supported_commands_return_t *return_params)
 Zephyr Read Supported Commands.
 
int hci_vs_sdc_zephyr_write_bd_addr (const sdc_hci_cmd_vs_zephyr_write_bd_addr_t *params)
 Zephyr Write BD ADDR.
 
int hci_vs_sdc_zephyr_read_static_addresses (sdc_hci_cmd_vs_zephyr_read_static_addresses_return_t *return_params)
 Zephyr Read Static Addresses.
 
int hci_vs_sdc_zephyr_read_key_hierarchy_roots (sdc_hci_cmd_vs_zephyr_read_key_hierarchy_roots_return_t *return_params)
 Zephyr Read KEY Hierarchy Roots.
 
int hci_vs_sdc_zephyr_read_chip_temp (sdc_hci_cmd_vs_zephyr_read_chip_temp_return_t *return_params)
 Zephyr Read Chip Temperature.
 
int hci_vs_sdc_zephyr_write_tx_power (const sdc_hci_cmd_vs_zephyr_write_tx_power_t *params, sdc_hci_cmd_vs_zephyr_write_tx_power_return_t *return_params)
 Zephyr Write Tx Power Level (per Role/Connection).
 
int hci_vs_sdc_zephyr_read_tx_power (const sdc_hci_cmd_vs_zephyr_read_tx_power_t *params, sdc_hci_cmd_vs_zephyr_read_tx_power_return_t *return_params)
 Zephyr Read Tx Power Level (per Role/Connection) Command.
 
int hci_vs_sdc_read_supported_vs_commands (sdc_hci_cmd_vs_read_supported_vs_commands_return_t *return_params)
 Read Supported Vendor Specific Commands.
 
int hci_vs_sdc_llpm_mode_set (const sdc_hci_cmd_vs_llpm_mode_set_t *params)
 Set Low Latency Packet Mode.
 
int hci_vs_sdc_conn_update (const sdc_hci_cmd_vs_conn_update_t *params)
 Connection Update.
 
int hci_vs_sdc_conn_event_extend (const sdc_hci_cmd_vs_conn_event_extend_t *params)
 Enable or Disable Extended Connection Events.
 
int hci_vs_sdc_qos_conn_event_report_enable (const sdc_hci_cmd_vs_qos_conn_event_report_enable_t *params)
 QoS Connection Event Reports enable.
 
int hci_vs_sdc_event_length_set (const sdc_hci_cmd_vs_event_length_set_t *params)
 Set event length for ACL connections.
 
int hci_vs_sdc_periodic_adv_event_length_set (const sdc_hci_cmd_vs_periodic_adv_event_length_set_t *params)
 Set event length for periodic advertisers.
 
int hci_vs_sdc_peripheral_latency_mode_set (const sdc_hci_cmd_vs_peripheral_latency_mode_set_t *params)
 Set peripheral latency mode.
 
int hci_vs_sdc_write_remote_tx_power (const sdc_hci_cmd_vs_write_remote_tx_power_t *params)
 Write remote transmit power level.
 
int hci_vs_sdc_set_adv_randomness (const sdc_hci_cmd_vs_set_adv_randomness_t *params)
 Set advertising randomness.
 
int hci_vs_sdc_compat_mode_window_offset_set (const sdc_hci_cmd_vs_compat_mode_window_offset_set_t *params)
 Set Compatibility mode for window offset.
 
int hci_vs_sdc_qos_channel_survey_enable (const sdc_hci_cmd_vs_qos_channel_survey_enable_t *params)
 Enable the Quality of Service (QoS) channel survey module.
 
int hci_vs_sdc_set_power_control_request_params (const sdc_hci_cmd_vs_set_power_control_request_params_t *params)
 Set LE Power Control Request procedure parameters.
 
int hci_vs_sdc_read_average_rssi (const sdc_hci_cmd_vs_read_average_rssi_t *params, sdc_hci_cmd_vs_read_average_rssi_return_t *return_params)
 Read average RSSI.
 
int hci_vs_sdc_central_acl_event_spacing_set (const sdc_hci_cmd_vs_central_acl_event_spacing_set_t *params)
 Set Central ACL event spacing.
 
int hci_vs_sdc_set_conn_event_trigger (const sdc_hci_cmd_vs_set_conn_event_trigger_t *params)
 Set Connection Event Trigger.
 
int hci_vs_sdc_get_next_conn_event_counter (const sdc_hci_cmd_vs_get_next_conn_event_counter_t *params, sdc_hci_cmd_vs_get_next_conn_event_counter_return_t *return_params)
 Get Next Connection Event Counter.
 
int hci_vs_sdc_allow_parallel_connection_establishments (const sdc_hci_cmd_vs_allow_parallel_connection_establishments_t *params)
 Allow Parallel Connection Establishment.
 
int hci_vs_sdc_min_val_of_max_acl_tx_payload_set (const sdc_hci_cmd_vs_min_val_of_max_acl_tx_payload_set_t *params)
 Set the minimum value that will be used as maximum Tx octets for ACL connections.
 
int hci_vs_sdc_iso_read_tx_timestamp (const sdc_hci_cmd_vs_iso_read_tx_timestamp_t *params, sdc_hci_cmd_vs_iso_read_tx_timestamp_return_t *return_params)
 Iso Read Tx Timestamp.
 
int hci_vs_sdc_big_reserved_time_set (const sdc_hci_cmd_vs_big_reserved_time_set_t *params)
 Set the default BIG reserved time.
 
int hci_vs_sdc_cig_reserved_time_set (const sdc_hci_cmd_vs_cig_reserved_time_set_t *params)
 Set the default CIG reserved time.
 
int hci_vs_sdc_cis_subevent_length_set (const sdc_hci_cmd_vs_cis_subevent_length_set_t *params)
 Set the CIS subevent length in microseconds.
 
int hci_vs_sdc_scan_channel_map_set (const sdc_hci_cmd_vs_scan_channel_map_set_t *params)
 Set the channel map for scanning and initiating.
 
int hci_vs_sdc_scan_accept_ext_adv_packets_set (const sdc_hci_cmd_vs_scan_accept_ext_adv_packets_set_t *params)
 Scan accept extended advertising packets set.
 
int hci_vs_sdc_set_role_priority (const sdc_hci_cmd_vs_set_role_priority_t *params)
 Set priority of a BT role.
 
int hci_vs_sdc_set_event_start_task (const sdc_hci_cmd_vs_set_event_start_task_t *params)
 Set Event Start Task.
 
int hci_vs_sdc_conn_anchor_point_update_event_report_enable (const sdc_hci_cmd_vs_conn_anchor_point_update_event_report_enable_t *params)
 Connection Anchor_Point Update Event Reports enable.