lwm2m_codec_defines.h File Reference

Go to the source code of this file.

Macros
#define	LWM2M_RES_DATA_FLAG_RW   0
#define	LATITUDE_RID   0
#define	LONGITUDE_RID   1
#define	ALTITUDE_RID   2
#define	RADIUS_RID   3
#define	LOCATION_TIMESTAMP_RID   5
#define	SPEED_RID   6
#define	NETWORK_BEARER_ID   0
#define	AVAIL_NETWORK_BEARER_ID   1
#define	RSS   2
#define	IP_ADDRESSES   4
#define	APN   7
#define	CELLID   8
#define	SMNC   9
#define	SMCC   10
#define	LAC   12
#define	FIRMWARE_VERSION_RID   3
#define	SOFTWARE_VERSION_RID   19
#define	DEVICE_SERIAL_NUMBER_ID   2
#define	CURRENT_TIME_RID   13
#define	POWER_SOURCE_VOLTAGE_RID   7
#define	MODEL_NUMBER_RID   1
#define	MANUFACTURER_RID   0
#define	HARDWARE_VERSION_RID   18
#define	CONFIGURATION_OBJECT_ID   50009
#define	PASSIVE_MODE_RID   0
#define	LOCATION_TIMEOUT_RID   1
#define	ACTIVE_WAIT_TIMEOUT_RID   2
#define	MOVEMENT_RESOLUTION_RID   3
#define	MOVEMENT_TIMEOUT_RID   4
#define	ACCELEROMETER_ACT_THRESHOLD_RID   5
#define	GNSS_ENABLE_RID   6
#define	NEIGHBOR_CELL_ENABLE_RID   7
#define	ACCELEROMETER_INACT_THRESHOLD_RID   8
#define	ACCELEROMETER_INACT_TIMEOUT_RID   9
#define	LTE_FDD_BEARER   6U
#define	NB_IOT_BEARER   7U
#define	BME680_TEMP_MIN_RANGE_VALUE   -40.0
#define	BME680_TEMP_MAX_RANGE_VALUE   85.0
#define	BME680_TEMP_UNIT   "Celsius degrees"
#define	BME680_HUMID_MIN_RANGE_VALUE   0.0
#define	BME680_HUMID_MAX_RANGE_VALUE   100.0
#define	BME680_HUMID_UNIT   "%"
#define	BME680_PRESSURE_MIN_RANGE_VALUE   30.0
#define	BME680_PRESSURE_MAX_RANGE_VALUE   110.0
#define	BME680_PRESSURE_UNIT   "kPa"
#define	BUTTON1_OBJ_INST_ID   0
#define	BUTTON1_APP_NAME   "Push button 1"
#define	BUTTON2_OBJ_INST_ID   1
#define	BUTTON2_APP_NAME   "Push button 2"