Other samples

This section lists single nRF Connect SDK samples for various uses that are not part of other sections.

General information about samples in the nRF Connect SDK

• If you are working with embedded devices, it is a good practice to first test your setup by programming an unchanged sample to your development kit.

• Some samples in the nRF Connect SDK are currently not designed to work out-of-tree. You may need to manually configure your sample to work correctly in the nRF Connect for VS Code extension.

• All samples in the nRF Connect SDK use Fatal error handler library and are configured to perform a system reset if a fatal error occurs. This behavior is different from how fatal errors are handled in the Zephyr samples. You can change the default behavior by updating the configuration option CONFIG_RESET_ON_FATAL_ERROR.

• All samples in the nRF Connect SDK are tested and verified in accordance with their maturity level.

If you want to list samples available for one or more specific boards, use the nRF Connect for Visual Studio Code extension to filter them.

Subpages

• Application Event Manager
• Application Event Manager profiling tracer
• nRF Secure Immutable Bootloader
• Common Application Framework preview
• CAF: Sensor manager
• Event Manager Proxy
• Hardware ID
• Profiler
• IPC service
• MPSL timeslot
• CoreMark
• nRF Compression: MCUboot compressed update
• Multicore idle test
• Multicore idle GPIO test
• PWM in low power states test