Wi-Fi Management
Overview
The Wi-Fi management API is used to manage Wi-Fi networks. It supports below modes:
IEEE802.11 Station (STA)
IEEE802.11 Access Point (AP)
Only personal mode security is supported with below types:
Open
WPA2-PSK
WPA3-PSK-256
WPA3-SAE
The Wi-Fi management API is implemented in the wifi_mgmt module as a part of the networking L2
stack.
Currently, two types of Wi-Fi drivers are supported:
Networking or socket offloaded drivers
Native L2 Ethernet drivers
Wi-Fi Enterprise test: X.509 Certificate header generation
Wi-Fi enterprise security requires use of X.509 certificates, test certificates in PEM format are committed to the repo at samples/net/wifi/test_certs and the during the build process the certificates are converted to a C header file that is included by the Wi-Fi shell module.
$ cp client.pem samples/net/wifi/test_certs/
$ cp client-key.pem samples/net/wifi/test_certs/
$ cp ca.pem samples/net/wifi/test_certs/
$ cp client2.pem samples/net/wifi/test_certs/
$ cp client-key2.pem samples/net/wifi/test_certs/
$ cp ca2.pem samples/net/wifi/test_certs/
$ west build -p -b <board> samples/net/wifi -- -DEXTRA_CONF_FILE=overlay-enterprise.conf
For using variable size network buffer, the following overlay file can be used:
$ west build -p -b <board> samples/net/wifi -- -DEXTRA_CONF_FILE=overlay-enterprise-variable-bufs.conf
To initiate Wi-Fi connection, the following command can be used:
uart:~$ wifi connect -s <SSID> -c 149 -k 17 -w 2 -a client1 --key1-pwd whatever --key2-pwd whatever --eap-id1 id1 --eap-pwd1 pwd1
Server certificate is also provided in the same directory for testing purposes.
Any AAA server can be used for testing purposes, for example, FreeRADIUS or hostapd.
Note
The certificates are for testing purposes only and should not be used in production. They are generated using FreeRADIUS raddb scripts.