Zephyr API 3.6.99
|
Configuration Client Model APIs. More...
Go to the source code of this file.
Data Structures | |
struct | bt_mesh_cfg_cli_cb |
Mesh Configuration Client Status messages callback. More... | |
struct | bt_mesh_cfg_cli |
Mesh Configuration Client Model Context. More... | |
struct | bt_mesh_cfg_cli_mod_pub |
Model publication configuration parameters. More... | |
struct | bt_mesh_cfg_cli_hb_sub |
Heartbeat subscription configuration parameters. More... | |
struct | bt_mesh_cfg_cli_hb_pub |
Heartbeat publication configuration parameters. More... | |
struct | bt_mesh_comp_p0 |
Parsed Composition data page 0 representation. More... | |
struct | bt_mesh_comp_p0_elem |
Composition data page 0 element representation. More... | |
struct | bt_mesh_comp_p1_elem |
Composition data page 1 element representation. More... | |
struct | bt_mesh_comp_p1_model_item |
Composition data page 1 model item representation. More... | |
struct | bt_mesh_comp_p1_item_short |
Extended Model Item in short representation. More... | |
struct | bt_mesh_comp_p1_item_long |
Extended Model Item in long representation. More... | |
struct | bt_mesh_comp_p1_ext_item |
Extended Model Item. More... | |
struct | bt_mesh_comp_p2_record |
Composition data page 2 record parsing structure. More... | |
Macros | |
#define | BT_MESH_MODEL_CFG_CLI(cli_data) |
Generic Configuration Client model composition data entry. | |
#define | BT_MESH_PUB_PERIOD_100MS(steps) |
Helper macro to encode model publication period in units of 100ms. | |
#define | BT_MESH_PUB_PERIOD_SEC(steps) |
Helper macro to encode model publication period in units of 1 second. | |
#define | BT_MESH_PUB_PERIOD_10SEC(steps) |
Helper macro to encode model publication period in units of 10 seconds. | |
#define | BT_MESH_PUB_PERIOD_10MIN(steps) |
Helper macro to encode model publication period in units of 10 minutes. | |
Functions | |
int | bt_mesh_cfg_cli_node_reset (uint16_t net_idx, uint16_t addr, bool *status) |
Reset the target node and remove it from the network. | |
int | bt_mesh_cfg_cli_comp_data_get (uint16_t net_idx, uint16_t addr, uint8_t page, uint8_t *rsp, struct net_buf_simple *comp) |
Get the target node's composition data. | |
int | bt_mesh_cfg_cli_beacon_get (uint16_t net_idx, uint16_t addr, uint8_t *status) |
Get the target node's network beacon state. | |
int | bt_mesh_cfg_cli_krp_get (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t *status, uint8_t *phase) |
Get the target node's network key refresh phase state. | |
int | bt_mesh_cfg_cli_krp_set (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t transition, uint8_t *status, uint8_t *phase) |
Set the target node's network key refresh phase parameters. | |
int | bt_mesh_cfg_cli_beacon_set (uint16_t net_idx, uint16_t addr, uint8_t val, uint8_t *status) |
Set the target node's network beacon state. | |
int | bt_mesh_cfg_cli_ttl_get (uint16_t net_idx, uint16_t addr, uint8_t *ttl) |
Get the target node's Time To Live value. | |
int | bt_mesh_cfg_cli_ttl_set (uint16_t net_idx, uint16_t addr, uint8_t val, uint8_t *ttl) |
Set the target node's Time To Live value. | |
int | bt_mesh_cfg_cli_friend_get (uint16_t net_idx, uint16_t addr, uint8_t *status) |
Get the target node's Friend feature status. | |
int | bt_mesh_cfg_cli_friend_set (uint16_t net_idx, uint16_t addr, uint8_t val, uint8_t *status) |
Set the target node's Friend feature state. | |
int | bt_mesh_cfg_cli_gatt_proxy_get (uint16_t net_idx, uint16_t addr, uint8_t *status) |
Get the target node's Proxy feature state. | |
int | bt_mesh_cfg_cli_gatt_proxy_set (uint16_t net_idx, uint16_t addr, uint8_t val, uint8_t *status) |
Set the target node's Proxy feature state. | |
int | bt_mesh_cfg_cli_net_transmit_get (uint16_t net_idx, uint16_t addr, uint8_t *transmit) |
Get the target node's network_transmit state. | |
int | bt_mesh_cfg_cli_net_transmit_set (uint16_t net_idx, uint16_t addr, uint8_t val, uint8_t *transmit) |
Set the target node's network transmit parameters. | |
int | bt_mesh_cfg_cli_relay_get (uint16_t net_idx, uint16_t addr, uint8_t *status, uint8_t *transmit) |
Get the target node's Relay feature state. | |
int | bt_mesh_cfg_cli_relay_set (uint16_t net_idx, uint16_t addr, uint8_t new_relay, uint8_t new_transmit, uint8_t *status, uint8_t *transmit) |
Set the target node's Relay parameters. | |
int | bt_mesh_cfg_cli_net_key_add (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, const uint8_t net_key[16], uint8_t *status) |
Add a network key to the target node. | |
int | bt_mesh_cfg_cli_net_key_get (uint16_t net_idx, uint16_t addr, uint16_t *keys, size_t *key_cnt) |
Get a list of the target node's network key indexes. | |
int | bt_mesh_cfg_cli_net_key_del (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t *status) |
Delete a network key from the target node. | |
int | bt_mesh_cfg_cli_app_key_add (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint16_t key_app_idx, const uint8_t app_key[16], uint8_t *status) |
Add an application key to the target node. | |
int | bt_mesh_cfg_cli_app_key_get (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t *status, uint16_t *keys, size_t *key_cnt) |
Get a list of the target node's application key indexes for a specific network key. | |
int | bt_mesh_cfg_cli_app_key_del (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint16_t key_app_idx, uint8_t *status) |
Delete an application key from the target node. | |
int | bt_mesh_cfg_cli_mod_app_bind (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_app_idx, uint16_t mod_id, uint8_t *status) |
Bind an application to a SIG model on the target node. | |
int | bt_mesh_cfg_cli_mod_app_unbind (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_app_idx, uint16_t mod_id, uint8_t *status) |
Unbind an application from a SIG model on the target node. | |
int | bt_mesh_cfg_cli_mod_app_bind_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_app_idx, uint16_t mod_id, uint16_t cid, uint8_t *status) |
Bind an application to a vendor model on the target node. | |
int | bt_mesh_cfg_cli_mod_app_unbind_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_app_idx, uint16_t mod_id, uint16_t cid, uint8_t *status) |
Unbind an application from a vendor model on the target node. | |
int | bt_mesh_cfg_cli_mod_app_get (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint8_t *status, uint16_t *apps, size_t *app_cnt) |
Get a list of all applications bound to a SIG model on the target node. | |
int | bt_mesh_cfg_cli_mod_app_get_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint16_t cid, uint8_t *status, uint16_t *apps, size_t *app_cnt) |
Get a list of all applications bound to a vendor model on the target node. | |
int | bt_mesh_cfg_cli_mod_pub_get (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, struct bt_mesh_cfg_cli_mod_pub *pub, uint8_t *status) |
Get publish parameters for a SIG model on the target node. | |
int | bt_mesh_cfg_cli_mod_pub_get_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint16_t cid, struct bt_mesh_cfg_cli_mod_pub *pub, uint8_t *status) |
Get publish parameters for a vendor model on the target node. | |
int | bt_mesh_cfg_cli_mod_pub_set (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, struct bt_mesh_cfg_cli_mod_pub *pub, uint8_t *status) |
Set publish parameters for a SIG model on the target node. | |
int | bt_mesh_cfg_cli_mod_pub_set_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint16_t cid, struct bt_mesh_cfg_cli_mod_pub *pub, uint8_t *status) |
Set publish parameters for a vendor model on the target node. | |
int | bt_mesh_cfg_cli_mod_sub_add (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint8_t *status) |
Add a group address to a SIG model's subscription list. | |
int | bt_mesh_cfg_cli_mod_sub_add_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint16_t cid, uint8_t *status) |
Add a group address to a vendor model's subscription list. | |
int | bt_mesh_cfg_cli_mod_sub_del (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint8_t *status) |
Delete a group address in a SIG model's subscription list. | |
int | bt_mesh_cfg_cli_mod_sub_del_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint16_t cid, uint8_t *status) |
Delete a group address in a vendor model's subscription list. | |
int | bt_mesh_cfg_cli_mod_sub_overwrite (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint8_t *status) |
Overwrite all addresses in a SIG model's subscription list with a group address. | |
int | bt_mesh_cfg_cli_mod_sub_overwrite_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t sub_addr, uint16_t mod_id, uint16_t cid, uint8_t *status) |
Overwrite all addresses in a vendor model's subscription list with a group address. | |
int | bt_mesh_cfg_cli_mod_sub_va_add (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t *virt_addr, uint8_t *status) |
Add a virtual address to a SIG model's subscription list. | |
int | bt_mesh_cfg_cli_mod_sub_va_add_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t cid, uint16_t *virt_addr, uint8_t *status) |
Add a virtual address to a vendor model's subscription list. | |
int | bt_mesh_cfg_cli_mod_sub_va_del (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t *virt_addr, uint8_t *status) |
Delete a virtual address in a SIG model's subscription list. | |
int | bt_mesh_cfg_cli_mod_sub_va_del_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t cid, uint16_t *virt_addr, uint8_t *status) |
Delete a virtual address in a vendor model's subscription list. | |
int | bt_mesh_cfg_cli_mod_sub_va_overwrite (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t *virt_addr, uint8_t *status) |
Overwrite all addresses in a SIG model's subscription list with a virtual address. | |
int | bt_mesh_cfg_cli_mod_sub_va_overwrite_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, const uint8_t label[16], uint16_t mod_id, uint16_t cid, uint16_t *virt_addr, uint8_t *status) |
Overwrite all addresses in a vendor model's subscription list with a virtual address. | |
int | bt_mesh_cfg_cli_mod_sub_get (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint8_t *status, uint16_t *subs, size_t *sub_cnt) |
Get the subscription list of a SIG model on the target node. | |
int | bt_mesh_cfg_cli_mod_sub_get_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint16_t cid, uint8_t *status, uint16_t *subs, size_t *sub_cnt) |
Get the subscription list of a vendor model on the target node. | |
int | bt_mesh_cfg_cli_hb_sub_set (uint16_t net_idx, uint16_t addr, struct bt_mesh_cfg_cli_hb_sub *sub, uint8_t *status) |
Set the target node's Heartbeat subscription parameters. | |
int | bt_mesh_cfg_cli_hb_sub_get (uint16_t net_idx, uint16_t addr, struct bt_mesh_cfg_cli_hb_sub *sub, uint8_t *status) |
Get the target node's Heartbeat subscription parameters. | |
int | bt_mesh_cfg_cli_hb_pub_set (uint16_t net_idx, uint16_t addr, const struct bt_mesh_cfg_cli_hb_pub *pub, uint8_t *status) |
Set the target node's Heartbeat publication parameters. | |
int | bt_mesh_cfg_cli_hb_pub_get (uint16_t net_idx, uint16_t addr, struct bt_mesh_cfg_cli_hb_pub *pub, uint8_t *status) |
Get the target node's Heartbeat publication parameters. | |
int | bt_mesh_cfg_cli_mod_sub_del_all (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint8_t *status) |
Delete all group addresses in a SIG model's subscription list. | |
int | bt_mesh_cfg_cli_mod_sub_del_all_vnd (uint16_t net_idx, uint16_t addr, uint16_t elem_addr, uint16_t mod_id, uint16_t cid, uint8_t *status) |
Delete all group addresses in a vendor model's subscription list. | |
int | bt_mesh_cfg_cli_net_key_update (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, const uint8_t net_key[16], uint8_t *status) |
Update a network key to the target node. | |
int | bt_mesh_cfg_cli_app_key_update (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint16_t key_app_idx, const uint8_t app_key[16], uint8_t *status) |
Update an application key to the target node. | |
int | bt_mesh_cfg_cli_node_identity_set (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t new_identity, uint8_t *status, uint8_t *identity) |
Set the Node Identity parameters. | |
int | bt_mesh_cfg_cli_node_identity_get (uint16_t net_idx, uint16_t addr, uint16_t key_net_idx, uint8_t *status, uint8_t *identity) |
Get the Node Identity parameters. | |
int | bt_mesh_cfg_cli_lpn_timeout_get (uint16_t net_idx, uint16_t addr, uint16_t unicast_addr, int32_t *polltimeout) |
Get the Low Power Node Polltimeout parameters. | |
int32_t | bt_mesh_cfg_cli_timeout_get (void) |
Get the current transmission timeout value. | |
void | bt_mesh_cfg_cli_timeout_set (int32_t timeout) |
Set the transmission timeout value. | |
int | bt_mesh_comp_p0_get (struct bt_mesh_comp_p0 *comp, struct net_buf_simple *buf) |
Create a composition data page 0 representation from a buffer. | |
struct bt_mesh_comp_p0_elem * | bt_mesh_comp_p0_elem_pull (const struct bt_mesh_comp_p0 *comp, struct bt_mesh_comp_p0_elem *elem) |
Pull a composition data page 0 element from a composition data page 0 instance. | |
uint16_t | bt_mesh_comp_p0_elem_mod (struct bt_mesh_comp_p0_elem *elem, int idx) |
Get a SIG model from the given composition data page 0 element. | |
struct bt_mesh_mod_id_vnd | bt_mesh_comp_p0_elem_mod_vnd (struct bt_mesh_comp_p0_elem *elem, int idx) |
Get a vendor model from the given composition data page 0 element. | |
struct bt_mesh_comp_p1_elem * | bt_mesh_comp_p1_elem_pull (struct net_buf_simple *buf, struct bt_mesh_comp_p1_elem *elem) |
Pull a Composition Data Page 1 Element from a composition data page 1 instance. | |
struct bt_mesh_comp_p1_model_item * | bt_mesh_comp_p1_item_pull (struct bt_mesh_comp_p1_elem *elem, struct bt_mesh_comp_p1_model_item *item) |
Pull a Composition Data Page 1 Model Item from a Composition Data Page 1 Element. | |
struct bt_mesh_comp_p1_ext_item * | bt_mesh_comp_p1_pull_ext_item (struct bt_mesh_comp_p1_model_item *item, struct bt_mesh_comp_p1_ext_item *ext_item) |
Pull Extended Model Item contained in Model Item. | |
struct bt_mesh_comp_p2_record * | bt_mesh_comp_p2_record_pull (struct net_buf_simple *buf, struct bt_mesh_comp_p2_record *record) |
Pull a Composition Data Page 2 Record from a composition data page 2 instance. | |
int | bt_mesh_key_idx_unpack_list (struct net_buf_simple *buf, uint16_t *dst_arr, size_t *dst_cnt) |
Unpack a list of key index entries from a buffer. | |
Configuration Client Model APIs.