nrfxlib API 2.8.99
|
#include <stdbool.h>
#include <stdint.h>
#include "nrf_802154_config.h"
#include "nrf_802154_sl_types.h"
#include "nrf_802154_types_internal.h"
Go to the source code of this file.
Functions | |
void | nrf_802154_trx_init (void) |
Initializes trx module. | |
void | nrf_802154_trx_enable (void) |
Enables trx module. | |
void | nrf_802154_trx_disable (void) |
Disables trx module. | |
void | nrf_802154_trx_antenna_update (void) |
Updates currently used antenna. | |
void | nrf_802154_trx_channel_set (uint8_t channel) |
Sets radio channel to use. | |
void | nrf_802154_trx_cca_configuration_update (void) |
Updates CCA configuration in the RADIO peripheral according to PIB. | |
void | nrf_802154_trx_receive_frame (uint8_t bcc, nrf_802154_trx_ramp_up_trigger_mode_t rampup_trigg_mode, nrf_802154_trx_receive_notifications_t notifications_mask, const nrf_802154_fal_tx_power_split_t *p_ack_tx_power) |
Puts the trx module into receive frame mode. | |
void | nrf_802154_trx_receive_ack (void) |
Puts the trx module into receive ACK mode. | |
bool | nrf_802154_trx_rssi_measure (void) |
Starts RSSI measurement. | |
bool | nrf_802154_trx_rssi_measure_is_started (void) |
Checks if RSSI measurement is currently started. | |
bool | nrf_802154_trx_rssi_sample_is_available (void) |
Checks if RSSI sample is available. | |
uint8_t | nrf_802154_trx_rssi_last_sample_get (void) |
Returns last measured RSSI sample. | |
bool | nrf_802154_trx_psdu_is_being_received (void) |
Check if PSDU is currently being received. | |
bool | nrf_802154_trx_receive_is_buffer_missing (void) |
Checks if current receive operation was started without providing receive buffer. | |
bool | nrf_802154_trx_receive_buffer_set (void *p_receive_buffer) |
Sets pointer to a receive buffer. | |
void | nrf_802154_trx_transmit_frame (const void *p_transmit_buffer, nrf_802154_trx_ramp_up_trigger_mode_t rampup_trigg_mode, uint8_t cca_attempts, const nrf_802154_fal_tx_power_split_t *p_tx_power, nrf_802154_trx_transmit_notifications_t notifications_mask) |
Begins frame transmit operation. | |
bool | nrf_802154_trx_transmit_ack (const void *p_transmit_buffer, uint32_t delay_us) |
Puts the trx module into transmit ACK mode. | |
bool | nrf_802154_trx_go_idle (void) |
Puts trx module into IDLE mode. | |
void | nrf_802154_trx_standalone_cca (void) |
Starts standalone cca operation. | |
void | nrf_802154_trx_energy_detection (uint32_t ed_count) |
Puts trx module into energy detection mode. | |
void | nrf_802154_trx_abort (void) |
Aborts currently performed operation. | |
trx_state_t | nrf_802154_trx_state_get (void) |
Gets current state of the TRX module. | |
uint32_t | nrf_802154_trx_ramp_up_ppi_channel_get (void) |
Gets (D)PPI channel used to trigger ramp up procedure start. | |
void | nrf_802154_trx_receive_ack_started (void) |
Handler called at the beginning of a ACK reception. | |
void | nrf_802154_trx_receive_frame_prestarted (void) |
Handler called at the beginning of frame reception (earliest possible moment). | |
void | nrf_802154_trx_receive_frame_started (void) |
Handler called at the beginning of frame reception. | |
uint8_t | nrf_802154_trx_receive_frame_bcmatched (uint8_t bcc) |
Handler called during reception of a frame, when given number of bytes is received. | |
void | nrf_802154_trx_receive_frame_received (void) |
Handler called when a frame is received with correct crc. | |
void | nrf_802154_trx_receive_frame_crcerror (void) |
Handler called when a frame is received with incorrect crc. | |
void | nrf_802154_trx_receive_ack_received (void) |
Handler called when an ack is received with correct crc. | |
void | nrf_802154_trx_receive_ack_crcerror (void) |
Handler called when an ack is received with incorrect crc. | |
void | nrf_802154_trx_transmit_frame_ccastarted (void) |
Handler called when a cca operation during transmit attempt started. | |
void | nrf_802154_trx_transmit_frame_ccaidle (void) |
Handler called when a cca operation during transmit attempt was successful. | |
void | nrf_802154_trx_transmit_frame_ccabusy (void) |
Handler called when a cca operation during transmit attempt failed. | |
void | nrf_802154_trx_transmit_frame_started (void) |
Handler called when frame transmission has just started. | |
void | nrf_802154_trx_transmit_frame_transmitted (void) |
Handler called when frame transmission has just been finished. | |
void | nrf_802154_trx_transmit_ack_started (void) |
Handler called when ack transmission has just been started. | |
void | nrf_802154_trx_transmit_ack_transmitted (void) |
Handler called when ack transmission has just been finished. | |
void | nrf_802154_trx_go_idle_finished (void) |
Handler called when trx module reached IDLE state. | |
void | nrf_802154_trx_standalone_cca_finished (bool channel_was_idle) |
Handler called when standalone cca operaion has been just finished. | |
void | nrf_802154_trx_energy_detection_finished (uint8_t ed_sample) |
Handler called when energy detection operation has been just finished. | |
const nrf_802154_sl_event_handle_t * | nrf_802154_trx_radio_end_event_handle_get (void) |
Returns RADIO->EVENTS_END handle that hardware can subscribe to. | |
const nrf_802154_sl_event_handle_t * | nrf_802154_trx_radio_ready_event_handle_get (void) |
Returns RADIO->EVENTS_READY handle that hardware can subscribe to. | |
const nrf_802154_sl_event_handle_t * | nrf_802154_trx_radio_crcok_event_handle_get (void) |
Returns RADIO->EVENTS_CRCOK handle that hardware can subscribe to. | |
const nrf_802154_sl_event_handle_t * | nrf_802154_trx_radio_phyend_event_handle_get (void) |
Returns RADIO->EVENTS_PHYEND handle that hardware can subscribe to. | |