Testing the DFU solution

You can evaluate the DFU functionality by running the SMP server sample for the nrf54l15dk/nrf54l15/cpuapp board target, which is available for both Bluetooth® LE and serial channels. This allows you to build and test the DFU solutions that are facilitated through integration with child images and the partition manager.

To compile the SMP server sample for testing secondary image slots on external SPI NOR flash, make sure you are in the ncs directory and run the command based on the selected partitioning method.

Partition ManagerDTS partitioning

To build with the Partition Manager, run the following command:

west build -b nrf54l15dk/nrf54l15/cpuapp -d build/smp_svr_54l zephyr/samples/subsys/mgmt/mcumgr/smp_svr -T sample.mcumgr.smp_svr.bt.nrf54l15pdk.ext_flash

This configuration sets up the secondary image slot on the serial flash memory installed on the nRF54L15 DK. It also enables the relevant SPI and the SPI NOR flash drivers.