MBOX Data
Overview
This sample demonstrates how to use the MBOX API in data transfer mode. It can be used only with mbox driver which supports data transfer mode.
Sample will ping-pong up to 4 bytes of data between two cores via two mbox channels. After each core receives data, it increments it by one and sends it back to other core.
Building and Running
The sample can be built and executed on boards supporting MBOX with data transfer mode.
Building the application for mimxrt1160_evk_cm7
# From the root of the zephyr repository
west build -b mimxrt1160_evk_cm7 --sysbuild samples/drivers/mbox_data/
west debug
Building the application for mimxrt1170_evk_cm7
# From the root of the zephyr repository
west build -b mimxrt1170_evk_cm7 --sysbuild samples/drivers/mbox_data/
west debug
Building the application for mimxrt1170_evkb_cm7
# From the root of the zephyr repository
west build -b mimxrt1170_evkb_cm7 --sysbuild samples/drivers/mbox_data/
west debug
Building the application for lpcxpresso55s69_cpu1
# From the root of the zephyr repository
west build -b lpcxpresso55s69_cpu1 --sysbuild samples/drivers/mbox_data/
west debug
Sample Output
Open a serial terminal (minicom, putty, etc.) and connect the board with the following settings:
Speed: 115200
Data: 8 bits
Parity: None
Stop bits: 1
Reset the board and the following message will appear on the corresponding serial port, one is the main core another is the remote core:
*** Booting Zephyr OS build zephyr-v3.5.0-4051-g12f4f4dc8679 ***
mbox_data Client demo started
Client send (on channel 3) value: 0
Client received (on channel 2) value: 1
Client send (on channel 3) value: 2
Client received (on channel 2) value: 3
Client send (on channel 3) value: 4
...
Client received (on channel 2) value: 95
Client send (on channel 3) value: 96
Client received (on channel 2) value: 97
Client send (on channel 3) value: 98
Client received (on channel 2) value: 99
mbox_data Client demo ended
*** Booting Zephyr OS build zephyr-v3.5.0-4051-g12f4f4dc8679 ***
mbox_data Server demo started
Server receive (on channel 3) value: 0
Server send (on channel 2) value: 1
Server receive (on channel 3) value: 2
Server send (on channel 2) value: 3
Server receive (on channel 3) value: 4
...
Server send (on channel 2) value: 95
Server receive (on channel 3) value: 96
Server send (on channel 2) value: 97
Server receive (on channel 3) value: 98
Server send (on channel 2) value: 99
mbox_data Server demo ended.