Memory controller (MEMC) driver

Overview

This sample can be used with any memory controller driver that memory maps external RAM. It is intended to demonstrate the ability to read and write from the memory mapped region.

Note that the chosen region (set by sram-ext dt alias node) should not overlap with memory used for XIP or SRAM by the application, as the sample would overwrite this data

Building and Running

This application can be built and executed on an RT595 EVK as follows:

west build -b mimxrt595_evk/mimxrt595s/cm33 samples/drivers/memc
west build -t run

To build for another board, change “mimxrt595_evk/mimxrt595s/cm33” above to that board’s name.

Sample Output

*** Booting Zephyr OS build zephyr-v3.2.0-2686-gd52d828c2bdc ***
Writing to memory region with base 0x38000000, size 0x800000

Check (0/8191) passed!
Check (1/8191) passed!
...
Check (8190/8191) passed!
Check (8191/8191) passed!

First 1KB of Data in memory:
\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=\=
00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
....

Read data matches written data